Electromyography (EMG)
Electromyography
(EMG) measures muscle response or electrical activity in response to a nerve’s
stimulation of the muscle. The test is used to help detect neuromuscular
abnormalities. During the test, one or more small needles (also called
electrodes) are inserted through the skin into the muscle. The electrical
activity picked up by the electrodes is then displayed on an oscilloscope (a
monitor that displays electrical activity in the form of waves). An
audio-amplifier is used so the activity can be heard.EMG measures the
electrical activity of muscle during rest, slight contraction and forceful
contraction. Muscle tissue does not normally produce electrical signals during
rest. When an electrode is inserted, a brief period of activity can be seen on
the oscilloscope, but after that, no signal should be present.
After
an electrode has been inserted, you may be asked to contract the muscle, for
example, by lifting or bending your leg. The action potential (size and shape
of the wave) that this creates on the oscilloscope provides information about
the ability of the muscle to respond when the nerves are stimulated. As the
muscle is contracted more forcefully, more and more muscle fibers are
activated, producing action potentials.
A
related procedure that may be performed is nerve conduction study (NCS). NCS is
a measurement of the amount and speed of conduction of an electrical impulse
through a nerve. NCS can determine nerve damage and destruction, and is often
performed at the same time as EMG. Both procedures help to detect the presence,
location, and extent of diseases that damage the nerves and muscles.
About the procedure (EMG)
Before
the procedure:
·
Your doctor will explain the procedure to you
and offer you the opportunity to ask any questions that you might have about
the procedure.
·
Generally, fasting is not required before the
test. In some cases, cigarettes and caffeinated beverages, such as coffee, tea,
and cola may be restricted two to three hours before testing.
·
Notify your doctor of all medications
(prescribed and over-the-counter) and herbal supplements that you are taking.
·
Notify your doctor if you have a pacemaker.
·
Dress in clothes that permit access to the area
to be tested or that are easily removed.
·
Stop using lotions or oils on your skin for a
few days before your procedure, or at least stop using them on the day of the
exam.
·
Based on your medical condition, your doctor may
request other specific preparation.
During the procedure:
An EMG procedure
may be performed on an outpatient basis or as part of your stay in a hospital.
Procedures may vary depending on your condition and your doctor's practices.
The EMG is performed by a neurologist (a doctor who specializes in brain and
nerve disorders), although a technologist may also perform some portions of the
test. The EMG is usually performed immediately following a nerve conduction
study (a test that measures the flow of current through a nerve before it
reaches the muscle rather than the response of muscle itself).
Generally, an
EMG procedure follows this process:
·
You will be asked to remove any clothing,
jewelry, hairpins, eyeglasses, hearing aids, or other metal objects that may
interfere with the procedure.If you are asked to remove clothing, you will be
given a gown to wear.
·
You will be asked to sit or lie down for the
test.
·
A neurologist will locate the muscle(s) to be
studied.
·
The skin will be cleansed with an antiseptic
solution. Next, a fine, sterile needle will be inserted into the muscle. A
ground electrode will be positioned under your arm or leg.
·
Five or more needle insertions may be necessary
for the test. You may experience slight pain with the insertion of the
electrode, but it is usually painless.
·
If the test is painful you must tell your
examiner because this can interfere with the results.
·
You will be asked to relax and then perform
slight or full-strength muscle contractions.
·
The electrical activity from your working muscle
will be measured and displayed on the oscilloscope.
·
An audio amplifier may also be used so that both
the appearance and sound of the electrical potentials can be evaluated. If the
recorder is attached to an audio amplifier, you may hear a sound like hail on a
tin roof when you contract your muscle.
After the procedure:
·
Some muscle soreness may persist for a day or so
following the procedure. Notify your doctor if you experience increasing pain,
tenderness, swelling, or pus at the needle insertion sites.Your physician may
give you additional or alternate instructions after the procedure, depending on
your particular situation.
About the procedure (NCS)
Before
the procedure:
·
Your doctor will explain the procedure to you
and offer you the opportunity to ask any questions that you might have about
the procedure.
·
Generally, no fasting or sedation is required
prior to the procedure.
·
Notify your doctor of all medications
(prescribed and over-the-counter) and herbal supplements that you are taking.
·
Dress in clothes that permit access to the area
to be tested or that are easily removed.
·
Stop using lotions or oils on your skin for a
few days before your procedure, or at least stop using them on the day of the
exam.
·
Based on your medical condition, your doctor may
request other specific preparation.
During the procedure:
A
nerve conduction study may be performed on an outpatient basis or as part of
your stay in a hospital. Procedures may vary depending on your condition and
your doctor's practices. The NCS is performed by a neurologist (a doctor who
specializes in brain and nerve disorders), although a specially trained
technician may also perform some portions of the test.
Generally,
a NCS procedure follows this process:
·
You will be asked to remove any clothing,
jewelry, hairpins, eyeglasses, hearing aids, or other metal objects that may
interfere with the procedure.If you are asked to remove clothing, you will be
given a gown to wear.
·
You will be asked to sit or lie down for the
test.
·
A neurologist or a technologist will locate the
nerve(s) to be studied.
·
A recording electrode will be attached to the
skin over the nerve with a special paste and a stimulating electrode will be
placed at a known distance away from the recording electrode.
·
The nerve will be stimulated by a mild and brief
electrical shock given through the stimulating electrode.
·
You may experience minor discomfort for a few
seconds.
·
The stimulation of the nerve and the detected
response will be displayed on an oscilloscope (a monitor that displays
electrical activity in the form of waves).
After the procedure:
·
The paste used to attach the electrodes will be
removed from your skin.
·
After the test, you may return to your previous
activities, unless your doctor advises you differently.Your physician may give
you additional or alternate instructions after the procedure, depending on your
particular situation.
মন্তব্যসমূহ
একটি মন্তব্য পোস্ট করুন